Cam & Groove Couplings, or Cam Lock Couplings, are popular in a wide array of vacuum and low pressure fluid applications where a hose assembly is frequently connected and removed. These couplings mate quickly and conveniently by inserting the grooved male adapter into the female cam coupling and simply closing the cam arms. A gasket inside the female coupling compresses as the cam arms close creating a tight leak free seal. Safety pins can be inserted to prevent the cam arms from accidental disconnection. Optional locking arms and dry-disconnect models are available to further reduce any potential spillage. Cam & Groove Couplings are available in a broad range of sizes, styles, & materials, and interchange between major brands in most sizes.
Available in Aluminum, Brass, Stainless Steel, Carbon Steel, Malleable Iron, Polypropylene, Nylon and select corrosion resistant metals (see below)
- Additional adapters, elbows, and reducer configurations available
- Broad range of sizes from 1/2″ through 12″
- Import, domestic &specialty series available
- Vented cam & groove, spring locking arms, and armless versions available (see below)
Not recommended for compressed gas service, including steam or air. Do not use type DC or DP in pressurized lines.
Reduce the risk of accidental disconnection with safety venting and arm-less locking cam couplings
Vent-Lock™ cam lock couplings lets a hose line depressurize before allowing the couplings to separate completely. EZLink couplings replace the standard cam arm with a spring-loaded tab that the operator must depress in order to disconnect, which can prevent accidental disconnection.
Additional product pages in the cam and groove line include:
Select styles and sizes of cam and groove couplings are available: (minimums may apply) Monel®, Hastelloy®, Carpenter 20®, & Tantaline®
® registered trademarks of their respective owners
Vent-Lock and EZLink are trademarks of Dixon Valve and Coupling Company, all rights reserved
WARNING: Cancer and reproductive harm. Visit www.P65warnings.ca.gov for additional information.
Per Section 1417 of the Safe Drinking Water Act (SDWA) use Lead free parts in all consumable water applications. Lead free refers to the wetted surface of pipes, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25%. Source: California Health & Safety Code (116875). Vermont Act 193*171NLF
Please contact us for a limited assortment of lead-free products