Pneumatic in-line tool lubricators are designed to inject an oil mist into the air supply line. This protects and prolongs the service life of pneumatic tools that require lubrication. In-line lubricators add a fine oil mist directly into the compressed air hose line, so operators do not have to continuously oil their tools. A transparent sight disc allows convenient visual confirmation of the unit’s oil level. Flow regulation is adjustable. Minimum flow rate is 30 SCFM for proper function. Use any non-detergent light weight petroleum-based oil (as specified by the tool manufacturer). An optional aluminum frame is available to maintain upright floor positioning. Protect pneumatic tools from debris with in-line air filters, also available.
- Size range from 1/2″ to 1″ NPT inlet and outlet
- Large capacity option available in 3/4″ size
- Not recommended for constant flow applications
- Air tool lubricant also available (standard and anti-freeze versions) in pint and gallon bottles
- Replacement parts are available
See also: Filter Regulator and Lubricator Systems (FRL)
Add a universal air coupling to easily adapt to standard jackhammer hose lines
WARNING: Cancer and reproductive harm. Visit www.P65warnings.ca.gov for additional information.
-
Per Section 1417 of the Safe Drinking Water Act (SDWA) use Lead free parts in all consumable water applications. Lead free refers to the wetted surface of pipes, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25%. Source: California Health & Safety Code (116875). Vermont Act 193*171NLF
Please contact us for a limited assortment of lead-free products
