Steel Braid Bull Hose is designed for heavy duty compressed air delivery in severe conditions and elevated working pressure service. The wire braid reinforcement improves kink-resistance, and also allows for a 600 PSI rating in ambient temperatures (when equally rated couplings are installed). Assemblies with bolted clamps (as shown) and crimped couplings are available. Bull air hose is capable of handling oil-misted air such as air compressor service having a lubricator at the source. This hose can also can be used to transfer water and light chemical solutions. A long lasting hose designed for demanding applications in mining, construction, quarries and equipment rental.
High-temperature version available in select sizes, minimum quantity may apply
Sizes: ½” through 4″
Tube: Nitrile Rubber Blend
Reinforcement: Steel Wire Braid
Cover: SBR Rubber, Fabric Impressed
Temperature: -25 to +200 deg F (pressure will decrease as temperature increases)
NEW LAY-FLAT COMPRESSED AIR HOSE IN 2 AND 3 INCH, 635 PSI AT HALF THE WEIGHT OF WIRE BRAID HOSE
Note: ALL Hose Assemblies are rated based on the lowest pressure rated component, not on the hose rating alone. 4-Lug universal couplings are rated at 150 PSI. Check torque on bolted clamps regularly.
Ground Joint Interlock Hose Couplings are recommended for higher pressure applications (not shown)
Bull Air Hose PDF Specification Page
Always use Hose Safety Whip Checks on air hose assemblies
Please also see this informative blog on air hose configuration
