Textile Braid Bull Hose with 4-lug Chicago CouplingTextile Braid Yellow Air Hose

Type 1801 textile reinforced air hose is a rugged hose designed for compressed air supply service in mining, quarries, construction, and industry. This hose has a tube material that can withstand oil-misted air such as compressor service with a lubricator at the source. Assemblies are available with bolted clamps (as shown) crimp sleeves, or band clamps. Textile braid yellow air hose can also be used as a heavy grade transfer hose for water, light chemicals, and other solutions.

Also see our wire braid bull hose series 1803 for increased durability and pressure rating.

Sizes: 1/4″ through 3″
Tube: Nitrile rubber blend
Reinforcement: 2 ply Synthetic Fabric Braid
Cover: Nitrile/SBR Rubber Blend, Fabric Impression (wrapped)
Temperature: -25 to +200 degrees F

Note: Assemblies are rated based on the working pressure of the coupling and the clamp along with the rating of the hose. 4-Lug universal couplings are rated at 150 PSI.  Boss ground joint fittings shown have higher rating and should be used when possible.  Check torque on bolted clamps regularly.

Always use Hose Safety Whip Checks on air hose assemblies

 

WARNING: This product contains Carbon Black, a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. Visit www.P65warnings.ca.gov for additional information.