Hammer unions are a fast and versatile connection for hose and threaded pipe. Offered in a wide range of sizes and pressure ratings, hammer unions can be used in a variety of applications and configurations. The three piece construction is similar to a pipe union, however it is designed for higher pressure service and can be quickly loosened and tightened by hammering the external lugs. Butt-weld style available in some sizes for permanent installation to pipe or equipment. O-ring style hammer unions offer excellent leak resistant sealing characteristics.
- Pressure ratings from 1000 to 10,000 (some sizes)
- Painted forged steel construction
- Butt weld is schedule 40 in 1000 and 2000 series, schedule 80 and xxs in higher pressure series
Frac hose couplings with union nuts are available 3 inch to 8 inch in figure 100 and figure 206 design. Hammer union half is directly installed on the hose rather than threaded or welded.
Flange adapters available in 4 inch male or female figure 206, straight and 45 degree.
WARNING: NEVER CONNECT DIFFERENT SERIES TO ONE ANOTHER
MIXING STYLES CAN RESULT IN FAILURE WHICH CAN LEAD TO SERIOUS HAZARDS
COLOR CODING DENOTES SERIES / PRESSURE CAPABILITY
Contact us to discuss which series is appropriate for your application
WARNING: Cancer and reproductive harm. Visit www.P65warnings.ca.gov for additional information.
-
Per Section 1417 of the Safe Drinking Water Act (SDWA) use Lead free parts in all consumable water applications. Lead free refers to the wetted surface of pipes, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25%. Source: California Health & Safety Code (116875). Vermont Act 193*171NLF
Please contact us for a limited assortment of lead-free products
